30mm Metal LED Tact Switches with IP67 Rating
The 30mm Metal LED Tact Switches series is an internal waterproof light-touch switch. Its short size is suitable for use in narrow spaces. It has a single-color/two-color/three-color common pole with light function, and can be wired with plugs. This momentory tact switch's operating ambient temperature range is from -20 ° C to 85 ° C , and with IP67 rating which suitable for a variety of different conditions.
The distinctive feature is the double action of the double throw switch; It will actuates when press mid-travel and , then continue pressing for another actuation at full travel. This Metal T act Switches also offer a nice tactile response which allow this series Tactile Push Button Switches to be used across a wide variety of applications and operating conditions. The applications is Medical equipment, Industrial control instruments and Computer.
SPECIFICATIONS
Panel Thickness: Ø30.20mm
Function:Momentary
Contact Rating: 50mA @ 12VDC.
Mechanical Life: 200,000 cycles
Contact Resistance: 50 m Ω max.
Insulation Resistance: 100M Ω min.
Operating Temperature: -20 ° C to 85 ° C
Electrical Life: 50,000 cycles make-and-break cycles.
Torque: 1~3Nm
Travel: About 0.3mm
Operation Pressure: About 1.5N
Dielectric Strength: 500 Vrms @sea level.
Ingress Protection: IP67
MATERIALS
BUSHING : Stainless Steel / Nickel plated brass / Aluminum alloy
BASE : PBT, PC
ACTUATOR : PC ; Stainless Steel / Nickel plated brass / Aluminum alloy
INNER ASSEMBLY : POM / PA66.
SPRING : Spring steel.
SEALING : Sillicone.
O-Ring : Sillicone
TERMINAL : Brass,with silver or gold plated.
HEX NUT : Nickel plated brass
Led: 1.8V/3V/6V/12V/24V/36V/48V/110V/220V
ILLUMINATION BASE RATlNG ：
Red ， Yellow and Orange ： 20mA 1.8V;
Blue, Green and White ： 20mA 2.8V
Beads Color ： R/U/G/Y/0/W/RGB
Our Advantages
Dari pembelian bahan mentah t o produk siap, semua proses pengeluaran (pembangunan produk/penyaduran/acuan dan pemprosesan peralatan/metalpressing/plasticinjection/semi-automatik dan peralatan peralatan automatik sepenuhnya, dll.) Diselesaikan di kilang. Suntikan logam dan suntikan plastik kami memiliki kelebihan sebanyak 100% acuan buatan sendiri, dari satu bentuk ke pelbagai bentuk permohonan. Dan kami terus menyimpan inovasi dan meningkatkan teknologi dalam ORD untuk bekerjasama dengan pelanggan kami untuk mereka bentuk produk yang paling canggih. Yeswitch Electronics Co., Ltd., sama ada di pangkalan pengeluaran atau jabatan jaminan kualiti di ibu pejabat, mempunyai peralatan profesional dan kakitangan teknikal. Sebagai tambahan kepada pembangunan produk tahunan tahunan, peningkatan produk dan ujian dilakukan sebagai pelan tahunan untuk memastikan produk tersenarai mengekalkan kualiti terbaik. Oleh itu, pelanggan/rakan kongsi jangka panjang kami, dapatkan kualiti terbaik suis .
Order Procedure
Production Procedure
Contact Now
